Scroll Compressor Sh120A3alc for Chiller & Freezer & Cold Storage

• After-sales Service: Online Service
• Warranty: Online Service
• Installation Type: Stationary Type
• Model NO.: SH120A4ALC
• Lubrication Style: Lubricated
• Cylinder Position: Vertical
• Suction Connection 1 5/8 ": Discharge Connection 1 2/8 "
• Capacity Control: Fixed Speed
• Compressor Power Supply: 400/3/50 460/3/60
• Configuration Code: Single
• Connection Type: Rotolock
• Factory HP: 33 Bar
• Factory Lp: 25 Bar
• Transport Package: Pallet
• Specification: CE / RoHs
• Trademark: Performer
• Origin: China
• HS Code: 8414301900
• Production Capacity: 1000

Product Description

Danfos Performer SH Series Scroll Compressor SH120A3ALC for Chiller & Freezer & Cold Storage


In a Performer® SM / SY / SZ scroll compressor, the compression is performed by two scroll elements located in the upper part of the compressor.
Suction gas enters the compressor at the suction connection. As all of the gas fl ows around and through the electrical motor, thus ensuring
complete motor cooling in all applications, oil droplets separate and fall into the oil sump. After exiting the electrical motor, the gas enters the
scroll elements where compression takes place.
Ultimately, the discharge gas leaves the compressor at the discharge connection.
The figure below illustrates the entire compression process. The centre of the orbiting scroll (in grey) traces a circular path around the centre of
the fi xed scroll (in black). This movement creates symmetrical compression pockets between the two scroll elements. Low-pressure suction gas is
trapped within each crescent-shaped pocket as it gets formed; continuous motion of the orbiting scroll serves to seal the pocket, which decreases
in volume as the pocket moves towards the centre of the scroll set increasing the gas pressure. Maximum compression is achieved once a pocket
reaches the centre where the discharge port is located; this stage occurs after three complete orbits. Compression is a continuous process: the
scroll movement is suction, compression and discharge all at the same time.

 

 

Product Details:

 

 

Gross weight	107.5 Kilogram
Net weight	92.16 Kilogram
Volume	0.23 Cubic meter
EAN	5702428582780

Type	SZ160
Product group	Hermetic compressors
Product Name Description	Scroll compressor SZ

 

Brand technique	After sale
Capacity control	Fixed speed
CE evaluated	Yes
China RoHS compliance	Yes with exemptions
Colour	Blue
Compressor power supply [V]	380-415/3/50 460/3/60
Configuration code	Single
Connection type	Rotolock
Contain batteries	No
Description	SZ160-4
Diameter [mm]	266 mm
Discharge connection height [mm]	596 mm
Discharge connection pipe size [in]	7/8 in
Discharge connection size [in]	1 3/4 in
Drawing number	8551120b
Economizer	No
EU RoHS compliance	Yes with exemptions
EU RoHS exemption clause	7(c)-I 6(a) 6(a)-I 6(c) 7(a) 8(b)
Factory HP [bar]	33 bar
Factory LP [bar]	25 bar
Family	SZ
Fitting remark	(shipped with rotolock version only)
Fitting sleeve	ODF
Fitting standard	Rotolock
Frequency [Hz]	50/60
Gauge port HP	None
Gauge port LP	Schrader
Glass mounting	Threaded
Glass torque [Nm]	50 N-m
GP LP torque [Nm]	15 N-m
High Side TS Max	150 °C
High Side TS Min	-35 °C
High Side Volume	1.7 L
High value of nominal voltage at 50Hz [V]	400 V
High value of nominal voltage at 60Hz [V]	460 V
High value of voltage range at 50Hz [V]	440 V
High value of voltage range at 60Hz [V]	506 V
IDV	No
In scope of WEEE	No
IP protection class	IP54 (with cable gland)
Low Side TS Max	54 °C
Low Side TS Min	-35 °C
Low Side Volume	16.5 L
Low value of nominal voltage at 50Hz [V]	380 V
Low value of nominal voltage at 60Hz [V]	460 V
Low value of voltage range at 50Hz [V]	342 V
Low value of voltage range at 60Hz [V]	414 V
LRA	150 A
Max pressure (PS) - high side	34.3 bar
Max pressure (PS) - low side	25 bar

Maximum Operating Current [MOC]	29 A
MMT	29 A
Model number	SZ160T4RC
Motor protection	Internal thermostat, ext. overload protector needed
Mounting torque [Nm]	21 N-m
Network power supply [V/Ph/Hz]	380-415/3/50 460/3/60
Number of starts per hour [Max]	12
Oil charge [L]	4 L
Oil drain	1/4'' flare
Oil drain torque [Nm]	35 N-m
Oil equalization	3/8'' flare SAE
Oil equalization torque [Nm]	48 N-m
Oil reference	160SZ
Oil type	POE
Packaging height [mm]	671 mm
Packaging length [mm]	470 mm
Packaging weight [Kg]	671 kg
Packaging width [mm]	370 mm
Packing format	Single pack
Packing quantity	1
Phase	3
Power connections	Screw 4.8 mm
REACH Candidate List substances	Lead (CAS no. 7439-92-1)
Refrigerant charge [kg] [Max]	12.5 kg
Refrigerants	R134a R404A R407C
Rotational speed at 50Hz [rpm]	2900 rpm
Rotational speed at 60Hz [rpm]	3500 rpm
SCIP dossier no.	58968d52-aa4c-4c0c-9aee-1ce6a31dfbd1
SCIP dossier product name	SM115/SM125/SM160/SM175/SM185/SZ115/SZ125/SZ160/SZ175/SZ185/SY185
Segment usage	Air conditioning
Shipped fittings	Suction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructions	Installation instructions
Shipped mounting	Mounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oil	Initial oil charge
Suction connection height [mm]	180 mm
Suction connection material	-
Suction connection pipe size [in]	1 3/8 in
Suction connection size [in]	2 1/4 in
Swept volume [cm3]	216.6 cm³
Technology	Scroll
Test dif [bar] [Max]	24 bar
Test HP [bar] [Max]	32 bar
Test LP [bar] [Max]	25 bar
Torque earth [Nm]	2 N-m
Torque Ebox cover [Nm]	2 N-m
Torque power [Nm]	3 N-m
Total height [mm]	631 mm
UL evaluated	Yes
Viscosity [cP]	32 cP
Winding resistance for three-phase compressors with identical windings [Ohm]	0.94 Ohm

 

 

 

 

 

 

 

CNAU is a shareholding system company specialized in trade of refrigeration compressors, freezing and air conditioning components. We have abundant technology with excellent service working team.