Basic Info.
Cylinder Arrangement
Balanced Opposed Arrangement
Structure Type
Closed Type
Application
Refrigeration and Air-Conditioning
Power
380-400V 3~50Hz/460V 3~60Hz
Transport Package
Pallet with Cartons
Product Description
Maneurop Reciprocating Hermetic Compressor MT MTZ Series NTZ068
Maneurop Reciprocating Hermetic Compressor MTZ100HP4AVE France Brand
Danfos Maneurop reciprocating compressors are specially designed for applications with a wide range of operating conditions. All components are of high quality and precision in order to assure a long product life.
Danfos Maneurop MT and MTZ series compressors are of the hermetic reciprocaing type and are designed for medium and high evaporating temperatureapplications.
Features
1. The compressor design allows for the motor to be 100% suction-gas cooled.The positive benefits of internal motor protection, high efficiency circular valve design and high torque motors provide for a quality installation.The MT series is designed for use with the "traditional" R22 refrigerant, using mineral oil 160P as lubricant. The MT series can also be applied with several R-22 based refrigerant blends (substitute refrigerants), using 160 ABM alkylbenzene as lubricant.
2. The MTZ series is specifically designed for use with the HFC refrigerants R-407C, R-134a, R-404A, and R-507A, using 160PZ polyester oil as lubricant.
3. MTZ compressors can be used in new installations and also to replace Maneurop® MTE compressors in existing installations.
4. MT and MTZ compressors have a large internal free volume that protects against the risk of liquid hammering when liquid refrigerant enters the compressor.
5. MT and MTZ compressors are fully suction-gas cooled. This means that no additional compressor cooling is required and allows the compressors to be insulated with acoustic jackets to obtain lower sound levels, without the risk of the compressor overheating.
Characteristics and Advantages
1. The compressor design allows for the motor to be 100% suction-gas cooled.The positive benefits of internal motor protection, high efficiency circular valve design and high torque motors provide for a quality installation.
2.The MT series is designed for use with the "traditional" R-22 refrigerant, using mineral oil 160P as lubricant. The MT series can also be applied with several R-22 based refrigerant blends (substitute refrigerants), using 160 ABM alkylbenzene as lubricant.
3. The MTZ series is specifically designed for use with the HFC freon R-407C, R-134a, R-404A, and R-507A.
4. MTZ compressors can be used in new refrigeration units and also to replace in existing refrigeration system.
5. MT and MTZ compressors have a large internal free volume to protects against the risk of liquid hammering.
5. MT and MTZ compressors are fully suction-gas cooled. This means that no additional compressor cooling is required and allows the compressors to be insulated with acoustic jackets to obtain lower sound levels, without the risk of the compressor overheating.
Our Maneurop compressors are for 50Hz,motor code is 4, can be used for R22/R407C/R134a/R404A/R507
1.piston /reciprocating type compressors.
2. Voltage is 50Hz
3. the refrigerant are R22/R407C/R134a/R404A/R507
4. there are MT/MTZ series.
5. original from France.
6. Capacity: 1.5HP~13HP,High efficiency , Low noise.
Technical Specifications
| Compressor model | Displacement | Cyl. number | Oil Charge | Net weight |
| Code | in3/rev | cfh at 3600 rpm | oz | lbs |
| MT/MTZ018 | JA | 1.84 | 231 | 1 | 32 | 46 |
| MT/MTZ022 | JC | 2.33 | 291 | 1 | 32 | 46 |
| MT/MTZ028 | JE | 2.93 | 367 | 1 | 32 | 51 |
| MT/MTZ032 | JF | 3.29 | 411 | 1 | 32 | 53 |
| MT/MTZ036 | JG | 3.69 | 461 | 1 | 32 | 55 |
| MT/MTZ040 | JH | 4.14 | 518 | 1 | 32 | 57 |
| MT/MTZ044 | HJ | 4.65 | 581 | 2 | 61 | 77 |
| MT/MTZ045 | HJ | 4.65 | 581 | 2 | 61 | 77 |
| MT/MTZ050 | HK | 5.23 | 653 | 2 | 61 | 77 |
| MT/MTZ051 | HK | 5.23 | 653 | 2 | 61 | 77 |
| MT/MTZ056 | HL | 5.87 | 733 | 2 | 61 | 82 |
| MT/MTZ057 | HL | 5.87 | 733 | 2 | 61 | 82 |
| MT/MTZ064 | HM | 6.57 | 822 | 2 | 61 | 82 |
| MT/MTZ065 | HM | 6.57 | 822 | 2 | 61 | 82 |
| MT/MTZ072 | HN | 7.38 | 922 | 2 | 61 | 88 |
| MT/MTZ073 | HN | 7.38 | 922 | 2 | 61 | 88 |
| MT/MTZ080 | HP | 8.29 | 1036 | 2 | 61 | 88 |
| MT/MTZ081 | HP | 8.29 | 1036 | 2 | 61 | 88 |
| MT/MTZ100 | HM | 10.45 | 1306 | 4 | 132 | 132 |
| MT/MTZ125 | HU | 13.15 | 1643 | 4 | 132 | 141 |
| MT/MTZ144 | HV | 14.76 | 1845 | 4 | 132 | 148 |
| MT/MTZ160 | HW | 16.57 | 2071 | 4 | 132 | 152 |
Product details
| Gross weight | 37.42 kg |
| Net weight | 34.93 kg |
| Approval standard | CE |
| Brand technique | Reciprocating compressor |
| Capacity control | Fixed speed |
| Colour | Blue |
| Compressor power supply [V/Ph/Hz] | 400/3/50 460/3/60 |
| Configuration code | Single |
| Connection type | Rotolock |
| Cylinder | 2 |
| Description | NTZ136-4B |
| Diameter [mm] | 288 mm |
| Discharge connection height [mm] | 74 mm |
| Discharge connection mounting torque [Nm] | 90 Nm |
| Discharge connection pipe size [in] | 3/4 in |
| Discharge connection rotolock size [in] | 1 1/4 in |
| Discharge connection size [in] | 1 1/4 in |
| Discharge connection sleeve pipe size [in] | 3/4 in |
| Drawing number | 8502012g |
| Economizer | No |
| Factory HP [bar] | 25 bar |
| Factory LP [bar] | 25 bar |
| Fitting remark | (shipped with rotolock version only) |
| Fitting sleeve | ODF |
| Fitting standard | Rotolock |
| Frequency [Hz] | 50 |
| Gauge port HP | None |
| Gauge port LP | Schrader |
| Generation code | A |
| Glass mounting | Threaded |
| Glass torque [Nm] | 50 Nm |
| GP LP torque [Nm] | 15 Nm |
| High side max pressure (Ps) | 28.5 bar |
| High Side TS Max | 150 °C |
| High Side TS Min | -35 °C |
| High Side Volume | 0.6 L |
| High value of nominal voltage at 50Hz [V] | 400 V |
| High value of voltage range at 50Hz [V] | 440 V |
| IP protection class | IP55 (with cable gland) |
| Low side max pressure (Ps) | 22.6 bar |
| Low Side TS Max | 50 °C |
| Low Side TS Min | -35 °C |
| Low Side Volume | 16.5 L |
| Low value of nominal voltage at 50Hz [V] | 380 V |
| Low value of voltage range at 50Hz [V] | 340 V |
| LRA | 51 A |
| MCC | 14.3 A |
| Model number | NTZ136A4LR1B |
| Motor protection | Internal overload protector |
| Mounting torque [Nm] | 15 Nm |
| Network power supply [V/Ph/Hz] | 380-415/3/50 460/3/60 |
| Number of starts per hour [Max] | 12 |
| Oil charge [L] | 1.8 L |
| Oil equalization | 3/8'' flare SAE |
| Oil equalization torque [Nm] | 30 Nm |
| Oil reference | 175PZ |
| Packaging height [mm] | 450 mm |
| Packaging length [mm] | 385 mm |
| Packaging width [mm] | 375 mm |
| Packing format | Single pack |
| Packing quantity | 1 |
| Phase | 3 |
| Power connections | Spade |
| Refrigerant | R404A
R452A |
| Refrigerant charge [kg] [Max] | 5 kg |
| Relief valve | 30 bar/8 bar |
| Rotational speed at 50Hz [rpm] | 2900 rpm |
| Segment usage | Refrigeration LT |
| Shipped fittings | Suction and discharge solder sleeves, rotolock nuts and gaskets |
| Shipped instructions | Installation instructions |
| Shipped mounting | Mounting kit with grommets, bolts, nuts, sleeves and washers |
| Shipped oil | Initial oil charge |
| Suction connection height [mm] | 265 mm |
| Suction connection mounting torque [Nm] | 110 Nm |
| Suction connection pipe size [in] | 1 1/8 in |
| Suction connection rotolock size [in] | 1 3/4 in |
| Suction connection size [in] | 1 3/4 in |
| Suction connection sleeve pipe size [in] | 1 1/8 in |
| Swept volume [cm3] | 136 cm³ |
| Technology | Reciprocating |
| Test dif [bar] [Max] | 30 bar |
| Test HP [bar] [Max] | 30 bar |
| Test LP [bar] [Max] | 25 bar |
| Torque earth [Nm] | 3 Nm |
| Torque power [Nm] | 3 Nm |
| Total height [mm] | 413 mm |
| Type | NTZ |
| Type designation | Compressor |
| Winding resistance for three-phase compressors with identical windings [Ohm] | 3.8 Ohm |
Technical Data
| Description | Model | PKG Qty | Refrigerant |
| Maneurop Compressor | MTZ28-4VM | 6 | R404a |
| Maneurop Compressor | MTZ36-4VM | 6 | R404a |
| Maneurop Compressor | MTZ40-4VM | 6 | R404a |
| Maneurop Compressor | MTZ50-4VM | 6 | R404a |
| Maneurop Compressor | MTZ56-4VM | 6 | R404a |
| Maneurop Compressor | MTZ64-4VM | 6 | R404a |
| Maneurop Compressor | MTZ72-4VM | 6 | R404a |
| Maneurop Compressor | MTZ80-4VM | 6 | R404a |
| Maneurop Compressor | MTZ100-4VM | 6 | R404a |
| Maneurop Compressor | MTZ125-4VM | 6 | R404a |
| Maneurop Compressor | MTZ144-4VM | 6 | R404a |
| Maneurop Compressor | MTZ160-4VM | 6 | R404a |
| Maneurop Compressor | MT28-4VM | 6 | R22 |
| Maneurop Compressor | MT36-4VM | 6 | R22 |
| Maneurop Compressor | MT40-4VM | 6 | R22 |
| Maneurop Compressor | MT50-4VM | 6 | R22 |
| Maneurop Compressor | MT64-4VM | 6 | R22 |
| Maneurop Compressor | MT72-4VM | 6 | R22 |
| Maneurop Compressor | MT80-4VM | 6 | R22 |
| Maneurop Compressor | MT100-4VM | 6 | R22 |
| Maneurop Compressor | MT125-4VM | 6 | R22 |
| Maneurop Compressor | MT144-4VM | 6 | R22 |
| Maneurop Compressor | MT160-4VM | 6 | R22 |
Approvals and certificates
| CE(European Directive) | All models |
UL
(Underwriters Laboratories) | All 60 Hz models |
CCC (China Compulsory
Product Certification) | Depending on the model and motor
voltage code. |
1. Easy maintenance with oil drain tube
2. Environmentally-friendly lead-free bearings
3. Easy to install, Energy saving, efficiency and silence
4. Prepared for manifolding with oil sight glass and oil equalizer
5. Place of Origin: France
6. Refrigerant: R22/R404A/R407C/R134a/R507
7. Certification: TUV, CCC, UL, VDE, CE, CRAA, TIS, KC, CB, INMETRO
Address:
6f, Building No.2 Huamei Ind.Est., Jingnan Road, Buji Town, Longgang District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Construction & Decoration, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware, Transportation
Management System Certification:
ISO 9001
Company Introduction:
CNAU is a shareholding system company specialized in trade of refrigeration compressors, freezing and air conditioning components. We have abundant technology with excellent service working team.
We have various products, now representing and selling more than 10 brands refrigeration products such as L′UNITE HERMETIQUE Compressors, COPELAND Compressors, BITZER Compressors, DANFOSS Controls and Valves, ROLLER Air Cooler, CASTEL Valves etc. And we are general agent for ROLLER in the south of China.
Meanwhile, we have researched and developed our own brand CNAU. Now we produce Relief Safety Valves, Moisture Indicators, Refrigeration Oil Separators, Suction Line Accumulators, Liquid Line Filter Driers, Fans and Motors, Condensers, and Air Coolers with their own brand CNAU. Our products have passed ISO9001-2000 approval, having Quality Certification for Export. They have been exporting to lots of regions and countries such as Australia, USA, Eastern Europe, Southeast Asia, Hong Kong etc.
CNAU has won good word-of-mouth for her great strength, abundant experience and perfect reputation at home and abroad. We promise to provide high quality products with perfect after-sale service.
We production one-stop refrigeration system solution, accept customization. Shoud you have any inquiry, feel free to contact us.
We hope to create a splendent future with you by our first-class products and pure-hearted services.
){kind=link}